Linux Consulting & Training

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Improved SNMP Zabbix 2.0 Template for QNAP devices ======

===== README FIRST =====

The Zabbix 3.x (and 4.0) updated version of this template is [[https://github.com/emanueleg/zabbix-templates|available on github]].

If you are looking for a 2.0 Zabbix template, a [[https://share.zabbix.com/storage-devices/qnap/zabbix-2-2-qnap-nas-snmp-template|similar template]] is available on Zabbix Share. Plasae ignore mine and use the "community" one, posting questions on the forum.

I'm just keeping the information below for historical reasons. :-)

===== QNAP Zabbix 2 Template =====


I have created an improved version of the SNMP QNAP Template for Zabbix 2.0 available on-line.
This new template is still based on SNMP, but has the following features:
  * Autodiscovery of Disks, Volumes, Network interfaces and Fans
  * Numerical values stored as real number
  * Triggers for multiple issues: lack of remaining disk space, hostname change, interface status change, reboot, high temperature, and cpu load too high
  * Graphs for network traffic

It has been tested with TS-200, TS-212P, and TS-569/569L.

To install the template, first create a Value mapping named "**QNAP Drive Status**" with the following values:
  4=Unknown
  5=No Disk
  6=Invalid
  9=Read/Write Error
  0=Ready

Then import the [[http://pastebin.com/eHrgc9B6|improved QNAP template]] and apply it to your NAS. That's all.